HiFinance 4
SECTION 7.2.3.5.1 - ADD A
NEW CARRIER
USAGE: To add a new Fuel Carrier to the Carriers
master-file. This option is only relevant if you are using the Fuels option.
You must add at least one fuel for the system to work. These Carriers are
different to the Gas Delivery Carriers. They can be setup as required. They
must, however already exist as a Creditors. The secondary function is to attach
Trucks to the Carrier. Unless these two things are done, the Carrier cannot be
used in the Deliveries program.
DISCUSSION: When you start this function, the computer will
initially ask for an Creditor code. Insert a code and press <Enter>. The Creditor must already exist in the Creditor
master file. If you do not remember the Creditor’s code, press <F9> to initiate a search.
HiFinance will then ask you to confirm your entry
and then the table header will be created for that Carrier. You will then be
shifted to the same screen as in MODIFY TABLE, where you can enter
Fuel’s information. (see SECTION 7.2.3.5.2.)
To return to the FUELS TABLE MENU, press <ESC>.
