HiFinance
4
SECTION
7.2.3.4.4 - FUELS LIST
USAGE: To produce a list of all or
a range of Fuels together with their component information. The report is
always printed in Fuel code order. This report is only relevant for those sites
that are using the Fuels option.
DISCUSSION: If you have chosen to allow short and long form reports, you will be asked USE LONG FORMAT REPORT? Choose the form you wish by entering Y or N.
Next you will be asked, INCLUDE ALL FUEL TYPES? If you enter Y all Fuels on file will be included and no further questions will be
asked. (Go to the START REPORT question.) If you press <ESC> you will return to the FUELS TABLE MENU.
If you enter N to the above question, the
following series of questions will appear:
FROM FUEL CODE This is the lower limit of the Fuel code. Here you
enter the code of the first Fuel you wish printed. The default answer is blank.
This will start printing from the start from the first Fuel.
TO FUEL CODE This is the upper limit of the Fuel code. Here you
enter the code of the last Fuel you wish printed. The default answer is zzzzzzzzzzzzzzz. This will end printing at the last Fuel. This
entry must not be less than the starting Fuel code. If you choose the default
for both questions all Fuels will be included.
At each point when answering the above questions,
you can press <ESC> and the program will reset
and return you to the FUELS TABLE MENU.
When you have entered all the above information,
press <F10> and you will be asked, START REPORT? If you answer N, the program will reset and
return you to the beginning. If you enter Y, the screen will clear and
the Inventory master-file will be read in. During this time the computer will
be selecting Fuels according to the selection criteria you have just entered
and will generate the report.
When the report has completed, HiFinance will return
you to the FUELS TABLE MENU.
The selection criteria are printed in the heading
lines of the report. The report itself will detail the Fuel code and
Description. If the Fuel is a blend, the components will be listed, with their
percentages.
At
the end of the report, the total of Fuels printed in this run will be printed.